Moisture Control

Multiple spray headers deliver a uniform curtain of water near the mixer inlet, knocking down airborne dust as it enters the mixer and initiating the conditioning process. Water spray distribution is controlled through individual spray nozzle selections and through valving of individual spray header lines. Precise moisture control is achieved through pressure regulation, with a maximum required pressure of 30 psi. Depending on the physical nature of the ash, moisture requirements range from 8% to 30% by weight.

Moisture Control Mixing Chamber System Design Material Feed

Individual Full Cone Spray Nozzles Provide a Uniform Curtain of Water

Water Spray Distribution is Controlled by Pressure & Flow Regulators

Special Wash-Out Headers are Designed to Assist in Mixer Cleaning

Non-Clogging Nozzles for Waste Water Utilization


Mixer Unloader Systems

For Wetting and Mixing of Ash and
Other Dusty, Abrasive Materials.

Learn More

Bottom Ash Conveyors

Continuous Collection & Dewatering of
Bottom Ash & Coarse Abrasive Materials

Learn More

Dry Ash Conveyors

Dust-Tight, Air-Tight Conveying
of Dry Abrasive Material.

Learn More

Integrated Systems

Custom Designed, Integrated
Mechanical Ash Handling Systems.

Learn More